Black BLK-IPD105M Especificações descarregar pdf (Página 80)

www.digiop.com

SECTION 3: SETUP CONFIGURATION

Display Options

Both options aect the web browser display and the burnt-in-annotation.

Minimum Alarm Object Display Time

When an alarm is generated, the tracking display marks the object in red. After some time, the object display fades back to yellow.

This setting controls the time the object is displayed in red before fading to yellow. The default value is 2000 milliseconds.

Minimum Object Display Time

When an object is tracked by the VCA engine, it is marked on the tracking display. This setting controls the minimum time an object

is displayed in the tracking display. It is usually set so that objects that are tracked for a very short time are displayed adequately. The

default value is 1000 milliseconds.

Restore All Default Settings

This button restores all VCA settings to their default values. By default, VCA is o. Therefore, VCA must be re-enabled to return all

VCA settings to their default values.

After selecting the VCA Advanced Settings for your camera or encoder, click Apply.

3.8.6 Load/Save Settings

VCA settings setup for a device can be exported to an XML le, and to re-loaded at a later time. Multiple detection scenarios can be

stored in separate conguration les. It can also be useful in congurations where multiple devices share many VCA conguration

parameters. To congure the load and save options for your camera or encoder, go to SETUP > VCA > Load/Save Settings

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 97 98

Sem comentários

Black BLK-IPD105M Especificações Página 80