Black BLK-IPD105M Especificações descarregar pdf (Página 71)

65IP Camera and Encoder Software Manual

SECTION 3: SETUP CONFIGURATION

Serial Port Setup

Select the appropriate values for the Baud Rate, Data, Parity, Stop, and Flow Control for communication with the encoder or IP

camera.

Apply and Reset

After making conguration changes, click Apply to save the settings, or click Reset to revert to the previous settings.

3.7 Maintenance

Through Maintenance menus you can enable a rmware updates, enable system logging and view logs, and enable VCA streaming

to display on the VIEW page. These settings require administrator access privilege.

3.7.1 Firmware Update

Firmware updates are enabled in the device software and performed using the IPAdmin Tool. Before uploading the rmware go to

SETUP > Maintenance > Firmware Update. Select Enable Firmware Update, set the port number, and then click Apply.

3.7.2 System Log

To open the System Log menu, go to SETUP > Maintenance > System Log

To use system logging:

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 97 98

Sem comentários

Black BLK-IPD105M Especificações Página 71