Black BLK-IPD105M Especificações descarregar pdf (Página 68)

www.digiop.com

SECTION 3: SETUP CONFIGURATION

Friendly name

Enter whatever friendly name for the DI and DO that you prefer. This feature is useful when DI and/or DO is activated, especially if

there are multiple device servers managed by your application program.

DI Trigger type

Select the DI device trigger type for the device installed (normally open (NO) or normally closed (NC)).

DI Re-arm period

The DI re-arm period sets the detection time interval for the event publisher. If “0” is specied, the device reports an event every

time a DI event is sensed. If “10” is specied, the device must sense DIs events within 10 seconds before reporting the event.

DO Hold period

The DO hold period sets the duration the DO is activated. If “0” is entered, the DO remains active until it is manually turned o. If

“10” is entered, DO is activated for 10 seconds.

Apply and Reset

After making conguration changes, click Apply to save the settings, or click Reset to revert to the previous settings.

Example

DI#1 and DO#1 are congured to sense and report the same event. The DI#1 trigger type is Normal Open. Suddenly DI#1 is triggered

by any kind of event.

Expected Response: The status of DO#1 will change from OFF to ON if the default setting is OFF. The status of DI#1 will change

from OPEN to CLOSE.

3.6.2 UART

Your camera or encoder may include up to two UART interface ports, identied as UART1 and UART2. To congure these UART

interfaces, go to SETUP > IO Conguration > UART

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 97 98

Sem comentários

Black BLK-IPD105M Especificações Página 68