Black BLK-IPD105M Especificações descarregar pdf (Página 7)

1IP Camera and Encoder Software Manual

SECTION 1: INTRODUCTION

SECTION 1

Introduction

This manual describes the rmware features Digiop Black encoders and cameras as seen through a web interface using Microsoft

Internet Explorer

(IE). The web interface uses these protocols:

• HTTP API: Parameter conguration commands

• RTP/RTSP: Video, Audio, and metadata streaming

• ActiveX program: tool to send data to a web page, such as a video stream

NOTE

This manual is based on a H.264 network video encoder. The web based user interface for all encoders and IP cameras is similar.

However, because of feature dierences, items included on some menus dier between models. Refer to the Section 5. Reference to

Models, for more information.

1.1 Getting started

When your IP camera or encoder is attached to a network and initially powered on, by default it attempts acquire compatible

network settings from a DHCP server. If it cannot nd a DHCP server, it congures itself with the following static IP address, subnet

mask, and gateway setting, which may or may not be compatible with other devices on the network.

IP address: 192.168.0.100

Subnet mask: 255.255.255.0

Gateway: 192.168.0.1

Whether it acquires a dynamic (changeable) IP address and other network settings from a DHCP server, or uses the default static

(xed, unchanging) settings, your camera or encoder must be congured with static network settings that are compatible with the

network conguration. Additionally, if DHCP is not used on your network, DIGIOP Black cameras and encoders must be installed on

the network and congured with new network settings one at a time to avoid addressing conicts.

After conguring the network settings for your camera or encoder, the IE browser is used to access the camera to setup the

application specic conguration.

1.1.1 Installing the IPAdmin Tool

The IPAdmin Tool, included on the CD mini disk, will discover all DIGIOP Black IP cameras and encoders installed on your network

and enable you to perform the initial network setup for each camera. After a camera is setup on the network, the Microsoft Internet

Explorer

web browser can be used to see video from the camera, set the camera’s password, date and time, nalize camera

hardware adjustments, and congure the camera for functional requirements.

The IPAdminTool can be loaded on a Microsoft Windows XP, Vista or Windows 7 operating system. To use this utility for the initial

setup of your camera, your computer must be connected to the same network subnet as your camera.

1 2 3 4 5 6 7 8 9 10 11 12 ... 97 98

Sem comentários

Black BLK-IPD105M Especificações Página 7