Black BLK-HDPTZ12 Manual do Utilizador descarregar pdf (Página 10)

SECTION 2: INSTALLATION

SECTION 2

Installation

2.1 General Guidelines

• The camera drop cable connects to the network cables (RS-485, alarm in/out, HD-SDI video out, 24 Vac power leads) inside

the mounting bracket provided with the camera. A cable access cover on the underside of the mounting bracket allows access

to cable connections, and to the composite video monitoring drop.

• Network cables can be routed into the mounting bracket through conduit attached to the underside of the mounting bracket,

or through the mounting bracket mounting.

• Hardware conguration switches (for camera ID, video mode, RS-485 protocol, etc.) are accessible when the camera dome

cover is removed.

• Position the camera in a location where it provides the best visibility of your surveillance targets, and is dicult to tamper with

or damage.

• Use extra care to avoid damaging the camera dome cover.

2.2 Install the mounting bracket

1. Using the mounting bracket as a template, mark the location of the mounting screw/wall anchor holes. Although bolts,

washers and wall anchors are included with the camera, these may not be appropriate for the surface where the bracket will

be attached. Always use the appropriate mounting hardware to ensure that the bracket is securely attached to the mounting

surface.

Mounting bracket

Cable access

cover

Conduit

connector

Wall anchor

Bolt and washer

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 51 52

Sem comentários

Black BLK-HDPTZ12 Manual do Utilizador Página 10