Black 8 Channel DVR Especificações descarregar pdf (Página 10)

Layout of the DVR4-2600

123 4 6 7 8

10 11 12 13 15 16 17 18 1914

1) Power Indicator: This LED is

illuminated when the DVR is connected

to power and switched on.

2) Infrared Sensor: Monitors signals

coming from the infrared remote control.

If this sensor is blocked or obstructed,

then the functionality of the remote will

be impaired.

3) Hard Drive Indicator: Lights up

when the hard drive is active. It will  ash

rapidly when recording or searching (in

time with the read/write cycles).

4) Menu/ESC: One of the primary

controls for navigating through the

menus. When in live-viewing mode, it

will enter the main menu. When pressed

in the main menu, it will return the DVR

to live-viewing mode. Finally, when in a

submenu, this button will return you to

the main menu.

5) PTZ: Opens the Pan, Tilt, Zoom pop-

up menu. This is used to control PTZ

capable camera systems, and will not

a ect standard cameras.

6) CH+: Moves “up” one channel.

7) CH-: As 6, but descends one channel.

8) Display (All) Mode: Enters split-

screen multi-view. The whole screen

is split into four or nine sections, each

displaying the images from one camera.

Press multiple times to cycle through all

available viewing modes.

9) Rewind: During playback, this will

reverse the footage. Press multiple times

to increase the speed of the reversing.

When navigating through menus, this

button will move the cursor to the left.

Static and Dynamic IP Addresses

In much the same way as your home network can use static or dynamic IP addresses,

many Internet providers don’t issue (or charge more for) a static IP address for users.

The easiest way to  nd out is to contact your Internet service provider. Alternately,

you can access the

www.whatismyip.com service, make a note of your IP, then reboot

your router/gateway. This should refresh your Internet connection. If your IP address

stays the same, you’ve probably got a static IP address. If it changes, you have a

dynamic IP address.

How do I deal with a dynamic IP address?

One option is to contact your ISP and request a static IP address. They’ll usually charge

a small fee for doing this. It’s worth noting that not all ISPs o er static IP addresses.

If your ISP does not o er static IP addresses then you can use a dynamic referencing

service, like www.dyndns.com. They o er a free service which will give you a text

address (such as www.exampleipaddress.example) which will take you directly to

your public IP address. For this service to work correctly, you’ll need to set up the DVR

to work with DDNS.

Server: Choose the server that you’re using. There are two options, DYNDNS (www.

dyndns.com) and 3322 (www.3322.org). We suggest DYNDNS, unless you are  uent

at reading Chinese.

Host Name: Enter the host name that you set up in your DDNS service. This is the

address you use to access your network.

Username and Password: Here, enter the username and password you setup with

your DDNS server. These do not have to match your username/password combina-

tion in either your DVR or router (for the sake of security, we suggest making them

di erent).

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 37 38

Comentários a estes Manuais

Sem comentários

Black 8 Channel DVR Especificações Página 10

Comentários a estes Manuais

Manuais e produtos relacionados com Gravadores de vídeo digitais (DVR) Black 8 Channel DVR